1. Home
  2. Cutters Edge CE94CRS Concrete Cutting Chainsaw

Cutters Edge CE94CRS Concrete Cutting Chainsaw

Call For Pricing


The CurtisDifference

Our CommitmentTo You

The CE94CRS Gasoline-powered Concrete Cutting Chainsaw is light weight, has more torque and can cut reinforced concrete up to 16-inches thick. Unlike hydraulic saws, no heavy, bulky power pack is needed and there are no hydraulic lines to get in the way. And, unlike rotary saws, there is no concrete dust produced and it can cut material more than twice as thick. Just one single water line with only a 2.5 gpm flow (9 liters/min) at 20 psi (1.5 bar) is needed to cool and lubricate the chain and prevent concrete cutting dust. A garden hose from a residential hose bib is all that is needed but water can be supplied from any water source: including a pumper, tender, hydrant, standpipe, the ocean, a lake, stream or even a puddle or bucket of water.

  • Reflective labels for increased visibility
  • 3 Axes 360° Swivel connector
  • Fuel mix
  • Muffler exhaust port cover
  • Wallwalker
  • Full wrap textured rubber covered handle
  • Flame coated guide bar
  • Diamond chain

  • Engine Type: 2-stroke, Air-cooled
  • Displacement: 5.7 cu in (94 cc)
  • Horespower: 6.4 hp (4.8 kW) @ 9,000 RPM
  • Torque: 50.4 in-lbs (5.7 Nm) @ 7,200 RPM
  • Engine Speed: 9,300 +/- 150 RPM (max), 2,700 +/- 100 RPM (idle)
  • Spark Plug: NGK BPMR7A or Champion RCJ6Y
  • Gap: 0.020 in (0.5 mm)
  • Weight: 22.25 lbs Powerhead only
  • Dimensions: 18" x 14" x 13"
  • Air Filter: Water Resistant Polyester
  • Carburetor: Walbro RXJ-5A, Throttle Shaft Sealed
  • Starter: Dust and Water Resistant
  • Ignition: Momentary contact on/off switch
  • Clutch: Centrifugal, Three Shoes, Three Springs
  • Water and Concrete Slurry Sealed
  • Fuel Ratio: 100:1 Cutters Edge Synthetic 2-cycle oil or 25:1 Petroleum-based 2-Cycle oil
  • Fuel Capacity: .26 Gallon (1 liter)
  • Water Supply: CE7COI - 5o PSI (3.45 bar) ...GCP - 20 PSI (1.5 bar)
  • Water Flow: Minimum 2.5 gpm (7.5 liters/min)
  • Noise Level: 106 dB(A) at 3 ft (1 m)
  • Vibration Level: 3.9 m/s (front handle), 4.1 m/s (rear handle)

Available in Bar Lengths: 12", 14" & 16"Available with 7COI Dimaond Chain or GCP SealPRO Diamond Chain.
Available in Kit or Saw only.